FP7 Antoinette – Qualified Clean Burning Decorative Fireplace
The US Environmental Protection Agency (EPA) initiated a voluntary program for manufacturers of decorative wood burning fireplaces to encourage them to produce clean wood-burning appliances that reduce air pollution.
Dare to design… the fireplace of your dreams, while being environmentally friendly.
The FP7-LM Antoinette wood fireplace already qualifies for phase II of that program which aims emission levels at or below the target of 5.1 g/kg (approximately 70 percent cleaner than unqualified models). Thus, you can benefit from a product with low particulate emissions.
Moreover, another advantage of this Valcourt fireplace is its guillotine door that disappears to allow you to load wood on the fire or relax with the crackle of the open fireplace.
The fire screen is also on a guillotine mechanism so you can close it when the ceramic glass door is open. Why Antoinette? Finally, a positive historical reference to the guillotine! The guillotine door and clean front gives you the flexibility to design your fireplace in any way that suits you.
The Antoinette is a truly versatile fireplace and is all about giving you the ability to design your dreaming fireplace.
|Firebox volume||0.150 m³|
|Fuel type||Dry cordwood|
|Recommended heating area (sq.ft.)||<1,000|
|Firebox volume (cu. ft.)||5.3|
|Burn rate||>5 kg/h (>11 lb/h)|
|Maximum log length||18″|
|Log positioning||Over width|
|Recommended chimney diameter||8″|
|Minimum chimney height (feet)||15|
|Approved for a mobile home installation||No|
|Weight||673 lb (305 kg)|
|Door type||Guillotine, glass with steel frame|
|Glass type||Ceramic glass|
|Glass surface – dimensions (Width X Height)||29 3/4″ x 19 1/2″|
|Overall dimension (Height)||64 1/8″|
|Overall dimension (Width)||48 7/8″|
|Overall dimension (Depth)||30 3/4″|
|Door opening – dimension (Height)||21 1/4″|
|Door opening – dimension (Width)||33″|
|Firebox – dimension (Height)||21 3/4″|
|Firebox – dimension (Width)||24 1/4″|
|Firebox – dimension (Depth)||11 1/2″|
|Centre line of flue outlet to the side||24 1/2″|
|Centre line of flue outlet to the back||9 3/8″|
|USA standard (emissions)||ASTM 2515 / ASTM 2558|
|USA standard (safety)||UL 127|
|Canadian standard (safety)||ULC-S610|