Harman Absolute 63 Pellet Stove

In Stock

For those who seek sophistication in all areas of life, there is the Absolute63 pellet stove. It is unparalleled, only attaining the Harman name after achieving strict quality standards. Performance and engineering excellence are infused into every detail of the Absolute. From its transitional styling and industry-leading heat, to its whisper-quiet operation and groundbreaking new Harman EASY Touch Control, this is the new standard of greatness.

View a Brochure:  https://downloads.hearthnhome.com/brochures/HAR-1711U_AbsoluteSeriesBrochure.pdf

  • Heats up to 3,400 sq ft with 14,100-61,800 BTUs*
  • Less loading with 72lb hopper capacity
  • Smart operation with EASY Touch Controls
  • Near silence with Whisper mode
  • Save money with built-in programmable thermostat
  • EPA certified

*based on climate and home efficiency

Dimensions in inches. Refer to installation/owner’s manual for detailed specifications on installing this product. Hearth & Home Technologies reserves the right to update units periodically. Product installation must adhere strictly to instructions shipped with product.

Model Specifications

Absolute63 Pellet Stove

Appliance Width: 28-1/16″ Appliance Height: 32-9/16″ Appliance Depth1: 29-9/16″ Fuel Type: Pellet BTU/hr Input2: 14,100 – 61,800 Heating Capacity3: up to 3,400 sq ft Hopper Capacity4: 72 lbs Viewing Area: 154 sq in Efficiency5: 83.2% Emissions: 1.4 grams/hour

1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

Framing depth will vary if you are installing the lower profile power vent (PVLP-SLP) with a minimum vent configuration. 12-1/2” is needed from the back of the appliance to the outside of the exterior wall. Refer to manual for details.

BTU: 1st hour output uses high burn efficiency number. BTU will vary depending on the type of fuel used and moisture content of the fuel.

2 BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8600 BTU, which is average BTU from a pound of pellets.

3 This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.

Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used.

4 Fuel density and pellet shape will affect hopper capacity.

5 Weighted Average LHV (Low Heating Value) efficiency.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner’s manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner’s/installation manual.

*For select products: Heating capacity to be used as a guide only. See your local dealer for help in determining the product that best suits your heating needs based on climate and home efficiency.

Specification Images

You May Also Like